Carlson Software Forum

Equip Sokkia and NovAtel GPS: For the Sokkia Radian/Radian

IS/GSR2600/GSR2650 and NovAtel, if an undulation value is detected in the
position

message, the undulation in the receiver will be set back to 0.0 and the
position will

temporarily be set to "Invalid".

**********************************************************************

The above statement was taken from the release notes posted for SurvCE
1.50.08.1

Could you explain what that means?

I loaded SurvCE 1.50.08.1 onto my Ranger 200C and now my Radian IS will
not give me a valid position.

When I tap on "Monitor" SurvCE tells me "invalid position from receiver".

What's up with this??????

SurvCE 1.50.07 worked just fine.

Thanks

John

John,
Please let me know if you are still having problems with your Sokkia.

--
Jason Dumas
Carlson Software
Technical Support Team
606-564-5028 ext 313
"John "Da Ringer"" <John@home.net> wrote in message
news:d8gd06$9j6$1@update.carlsonsw.com...

Equip Sokkia and NovAtel GPS: For the Sokkia Radian/Radian

IS/GSR2600/GSR2650 and NovAtel, if an undulation value is detected in the
position

message, the undulation in the receiver will be set back to 0.0 and the
position will

temporarily be set to "Invalid".

**********************************************************************

The above statement was taken from the release notes posted for SurvCE
1.50.08.1

Could you explain what that means?

I loaded SurvCE 1.50.08.1 onto my Ranger 200C and now my Radian IS will
not give me a valid position.

When I tap on "Monitor" SurvCE tells me "invalid position from receiver".

What's up with this??????

SurvCE 1.50.07 worked just fine.

Thanks

John