Hiper Floating And Elevation Error After Upgrage To 1.5

Moderator: Carlson Support

Hiper Floating And Elevation Error After Upgrage To 1.5

Postby Russ Walters » Thu Oct 06, 2005 5:07 pm

Awhile back I upgraded the Ranger from version 1 to 1.50. After this the
Hiper did not fix as well as it did previously and the elevations from
previous localizations were off about two tenths. After reading in
another post the following line:

"Do not mix 1.21 localization files with 1.50. The *.dat files are
formatted"

Is this the problem? Will I have to go back and relocalize all my work or
reload the older version or is there a workaround?

Thanks,
Russ





##-----------------------------------------------##
Article posted with MyNewsGroups :)
http://mynewsgroups.sourceforge.net
Share your knowledge in... carlson.survce
##-----------------------------------------------##
Russ Walters
 

Re: Hiper Floating And Elevation Error After Upgrage To 1.5

Postby probello » Thu Oct 13, 2005 8:02 pm

How much memory do you have in your Ranger, we had this same problem with
our Hiper and upgraded the memory in the Ranger, that fixed the float
problem.

Tricia

Russ Walters wrote:


Awhile back I upgraded the Ranger from version 1 to 1.50. After this
the
Hiper did not fix as well as it did previously and the elevations from
previous localizations were off about two tenths. After reading in
another post the following line:

"Do not mix 1.21 localization files with 1.50. The *.dat files are
formatted"

Is this the problem? Will I have to go back and relocalize all my work
or
reload the older version or is there a workaround?

Thanks,
Russ





##-----------------------------------------------##
Article posted with MyNewsGroups :)
http://mynewsgroups.sourceforge.net
Share your knowledge in... carlson.survce
##-----------------------------------------------##






##-----------------------------------------------##
Article posted with MyNewsGroups :)
http://mynewsgroups.sourceforge.net
Share your knowledge in... carlson.survce
##-----------------------------------------------##
probello
 

Re: Hiper Floating And Elevation Error After Upgrage To 1.5

Postby russ walters » Thu Oct 13, 2005 10:58 pm

Thanks for your reply. My Ranger shows 32,768KB of memory. I'll poke
around and see how much more memory I can add.
Russ

probello wrote:

How much memory do you have in your Ranger, we had this same problem
with
our Hiper and upgraded the memory in the Ranger, that fixed the float
problem.

Tricia

Russ Walters wrote:


Awhile back I upgraded the Ranger from version 1 to 1.50. After
this
the
Hiper did not fix as well as it did previously and the elevations
from
previous localizations were off about two tenths. After reading
in
another post the following line:

"Do not mix 1.21 localization files with 1.50. The *.dat files
are
formatted"

Is this the problem? Will I have to go back and relocalize all my
work
or
reload the older version or is there a workaround?

Thanks,
Russ





##-----------------------------------------------##
Article posted with MyNewsGroups :)
http://mynewsgroups.sourceforge.net
Share your knowledge in... carlson.survce
##-----------------------------------------------##






##-----------------------------------------------##
Article posted with MyNewsGroups :)
http://mynewsgroups.sourceforge.net
Share your knowledge in... carlson.survce
##-----------------------------------------------##






##-----------------------------------------------##
Article posted with MyNewsGroups :)
http://mynewsgroups.sourceforge.net
Share your knowledge in... carlson.survce
##-----------------------------------------------##
russ walters
 

Re: Hiper Floating And Elevation Error After Upgrage To 1.5

Postby Russ Walters » Fri Oct 14, 2005 10:43 pm

Thanks for the reply.
My Ranger shows 32,768KB of memory. I'll poke around and see if I can
upgrade the memory.
Thanks again,
Russ


probello wrote:

How much memory do you have in your Ranger, we had this same problem
with
our Hiper and upgraded the memory in the Ranger, that fixed the float
problem.

Tricia

Russ Walters wrote:


Awhile back I upgraded the Ranger from version 1 to 1.50. After
this
the
Hiper did not fix as well as it did previously and the elevations
from
previous localizations were off about two tenths. After reading
in
another post the following line:

"Do not mix 1.21 localization files with 1.50. The *.dat files
are
formatted"

Is this the problem? Will I have to go back and relocalize all my
work
or
reload the older version or is there a workaround?

Thanks,
Russ





##-----------------------------------------------##
Article posted with MyNewsGroups :)
http://mynewsgroups.sourceforge.net
Share your knowledge in... carlson.survce
##-----------------------------------------------##






##-----------------------------------------------##
Article posted with MyNewsGroups :)
http://mynewsgroups.sourceforge.net
Share your knowledge in... carlson.survce
##-----------------------------------------------##






##-----------------------------------------------##
Article posted with MyNewsGroups :)
http://mynewsgroups.sourceforge.net
Share your knowledge in... carlson.survce
##-----------------------------------------------##
Russ Walters
 


Return to SurvCE General

Who is online

Users browsing this forum: No registered users