Feature Code List Sorting & Format

Moderator: Carlson Support

Feature Code List Sorting & Format

Postby LloydL » Tue Jan 30, 2007 10:30 pm

I have a new Carlson 600+ and am trying to set up a feature code list.

Is there any setting to make the list appear in aphabetical order? When I
add codes they always appear at the top of the existing list reguardless
of what letter the code stats with.

Also, can you use single letter codes? I am having trouble with some
single letter codes not producing the expected line work (the single
letter "T", for example, that I use for telephone cable

Thanks in advance.


##-----------------------------------------------##
Article posted with CarlsonSWNewGroups
http://CarlsonSWNewGroups.sourceforge.net
Share your knowledge in... carlson.survce
##-----------------------------------------------##
LloydL
 

Re: Feature Code List Sorting & Format

Postby John Gerber » Mon Feb 05, 2007 9:52 pm

Hello,

I ran a few tests in SurvCE 1.65 {You can check your current version by
tapping Equip / About SurvCE}.

Every Code I added went into order automatically by Numbers first then
Letters. So 21 would go above 35 and above aa2. And bld would go after aa2
as I add them in using the "ADD" Button in File / Feature Code List inside
SurvCE.

I didn't have any problem setting up the Code "T" and using it with
Linework, it would have to be set to "Linework" = YES in the Feature Code
list. And you have to use "T" with a space after it in the Description of
your Point when you store it.



"LloydL" <lel1956@charter.net> wrote in message
news:epnvbb$41i$1@update.carlsonsw.com...
I have a new Carlson 600+ and am trying to set up a feature code list.

Is there any setting to make the list appear in aphabetical order? When I
add codes they always appear at the top of the existing list reguardless
of what letter the code stats with.

Also, can you use single letter codes? I am having trouble with some
single letter codes not producing the expected line work (the single
letter "T", for example, that I use for telephone cable

Thanks in advance.


##-----------------------------------------------##
Article posted with CarlsonSWNewGroups
http://CarlsonSWNewGroups.sourceforge.net
Share your knowledge in... carlson.survce
##-----------------------------------------------##
John Gerber
 

Re: Feature Code List Sorting & Format

Postby LloydL » Thu Feb 22, 2007 10:36 am

John,

I guess I didn't make myself clear. I was creating the feature code list
in Cazlson X-port. When I add feature codes in X-port they always go to
the top of the list, never in aphabetical order. Also, I have the letter
"T" setup as a code with line work but no line work is ever generated on
my Explorer 600+ runing SurvCE 1.65. I have other single letter line codes
setup and they work fine but "T" will not work.

I have resorted to using DOS editor to create a feature code list in
aphabetical order and that works fine since the FCL file is comma
delimited ASCII file.

Thanks,

LloydL



John GerberL wrote:

Hello,

I ran a few tests in SurvCE 1.65 {You can check your current version by

tapping Equip / About SurvCE}.

Every Code I added went into order automatically by Numbers first then
Letters. So 21 would go above 35 and above aa2. And bld would go after
aa2
as I add them in using the "ADD" Button in File / Feature Code
List inside
SurvCE.

I didn't have any problem setting up the Code "T" and using it
with
Linework, it would have to be set to "Linework" = YES in the
Feature Code
list. And you have to use "T" with a space after it in the
Description of
your Point when you store it.



"LloydL" <lel1956@charter.net> wrote in message
news:epnvbb$41i$1@update.carlsonsw.com...

I have a new Carlson 600+ and am trying to set up a feature code
list.

Is there any setting to make the list appear in aphabetical order?
When I
add codes they always appear at the top of the existing list
reguardless
of what letter the code stats with.

Also, can you use single letter codes? I am having trouble with
some
single letter codes not producing the expected line work (the
single
letter "T", for example, that I use for telephone cable

Thanks in advance.


##-----------------------------------------------##
Article posted with CarlsonSWNewGroups
http://CarlsonSWNewGroups.sourceforge.net
Share your knowledge in... carlson.survce
##-----------------------------------------------##








##-----------------------------------------------##
Article posted with CarlsonSWNewGroups
http://CarlsonSWNewGroups.sourceforge.net
Share your knowledge in... carlson.survce
##-----------------------------------------------##
LloydL
 

Re: Feature Code List Sorting & Format

Postby John Gerber » Tue Feb 27, 2007 9:31 pm

You should check in File / Feature Code List / Special Codes = if you have
changed any of the Special Codes to "T" then you cannot use T as a feature
code because its being Used as a Special Code. You could try Removing "T"
as a Code and then Adding it in from scratch and turning on the linework ---
if you store 2 or 3 points in a row with a description of T it should
connect those points with a line if you have that Layer turned on in Map /
View / Layer = make sure the Layer for T is turned on and check the Color
its using.



"LloydL" <lel1956@charter.net> wrote in message
news:erja5c$k5f$1@update.carlsonsw.com...
John,

I guess I didn't make myself clear. I was creating the feature code list
in Cazlson X-port. When I add feature codes in X-port they always go to
the top of the list, never in aphabetical order. Also, I have the letter
"T" setup as a code with line work but no line work is ever generated on
my Explorer 600+ runing SurvCE 1.65. I have other single letter line codes
setup and they work fine but "T" will not work.

I have resorted to using DOS editor to create a feature code list in
aphabetical order and that works fine since the FCL file is comma
delimited ASCII file.

Thanks,

LloydL



John GerberL wrote:

Hello,

I ran a few tests in SurvCE 1.65 {You can check your current version by

tapping Equip / About SurvCE}.

Every Code I added went into order automatically by Numbers first then
Letters. So 21 would go above 35 and above aa2. And bld would go after
aa2
as I add them in using the "ADD" Button in File / Feature Code
List inside
SurvCE.

I didn't have any problem setting up the Code "T" and using it
with
Linework, it would have to be set to "Linework" = YES in the
Feature Code
list. And you have to use "T" with a space after it in the
Description of
your Point when you store it.



"LloydL" <lel1956@charter.net> wrote in message
news:epnvbb$41i$1@update.carlsonsw.com...

I have a new Carlson 600+ and am trying to set up a feature code
list.

Is there any setting to make the list appear in aphabetical order?
When I
add codes they always appear at the top of the existing list
reguardless
of what letter the code stats with.

Also, can you use single letter codes? I am having trouble with
some
single letter codes not producing the expected line work (the
single
letter "T", for example, that I use for telephone cable

Thanks in advance.


##-----------------------------------------------##
Article posted with CarlsonSWNewGroups
http://CarlsonSWNewGroups.sourceforge.net
Share your knowledge in... carlson.survce
##-----------------------------------------------##








##-----------------------------------------------##
Article posted with CarlsonSWNewGroups
http://CarlsonSWNewGroups.sourceforge.net
Share your knowledge in... carlson.survce
##-----------------------------------------------##
John Gerber
 


Return to SurvCE General

Who is online

Users browsing this forum: No registered users