Page 1 of 1

SurvCE + TC1010

PostPosted: Mon Jun 08, 2009 8:06 pm
by Greenwood
We're trying to used SurvCE on a Leica RX1250XC with our Wild TC1010 and we cant get them to work together.

The TC1010 has been set to RS232 but nothing more.

In SurvCE:
Instrument setup is on Leica (wild) T1000 - 1 Row
Comms on Cable/Cable or Generic Device/Port Com 1/Baud 9600/Parity Even/Data Bits 7 and Stop Bits 1
We have entered our occupy points and Backsight points, then we've get our Backsight N Azi.

But when we try to read on Remote Benchmark we get an ''Error Reading Data!'' or when we try to store we've get an Input accepted message but nothing more...

Does anybody can help with a step by step procedure.

Regards.

PostPosted: Fri Jul 03, 2009 2:04 pm
by Greenwood
End up that there was a bad usb cable... :wink: