Bluetooth rs232 adapter
Posted:
Mon May 03, 2010 12:45 pmby ColC
I am currently using a Surveyor+ and a Sokkia 350R and I am trying to get a suitable bluetooth adapter. Can anyone recommend a suitable product. I have tried a BTI v2.0 without success. I think I tied every possible combination.
Posted:
Mon May 03, 2010 1:27 pmby Bruce Bock
I use one of these:
http://www.brainboxesstore.com/product_details_5.htm
to connect my Archer to a pair of 900Mhz spread spectrum modems to run my Leica robot. You can power it with 12v through pin 9 on the DB-9 connector, or, it will run on 6v through the barrel connector on the side of the device. Curt Busby at XYZ software sells them here in the USA.
https://solarcurt.powweb.com/store5/ago ... =Bluetooth.
bluetooth is problematic, BUT there aren't any wires...
BB
Posted:
Mon May 03, 2010 10:45 pmby ColC
Many thanks. That one looks a little more specific for our use.
plug-in unit
Posted:
Fri Jun 25, 2010 12:35 amby paulkoren
Sokkia now have (apart from the full official retrofit option) a plug-in Bluetooth module. It's a tiny thing that simply hangs of the total stations' Hirose connector with a 10cm cable. It draws power from the serial port, so no worries about batteries.
Its origins are in Sokkia Europe.