Carlson SurvCE 2.58 and Trimble 5800 problems

Moderator: Carlson Support

Carlson SurvCE 2.58 and Trimble 5800 problems

Postby cosma_florin » Mon Apr 02, 2012 5:48 am

I bought a Trimble 5800 GPS receiver and i want to test it with Carlson SurvCE 2.58. I set the 5800 as a NTRIP Rover: Bluetooth connection with 5800, RTK correction trough data collector or direct to port 2 of the 5800.
And now the strange behavior: when i select a base under 5 km everything is OK, I obtain fixed solution. When I choose a base at a distance greater than 5 km, I can't obtain fixed solution, only DGPS solution and the number of satellite used to calculate position fluctuate.
Please help me with some information.
cosma_florin
 
Posts: 1
Joined: Mon Apr 02, 2012 5:38 am

Postby ColC » Mon Apr 02, 2012 11:49 am

I am not regular GPS user, but I attended a conference only last week which covered some of those problems. If you are using a radio link you may be out of range for the radio frequency you are using.I am not familiar with the Trimble but some units with built in units radios more suitable for short range.

Then again it be something entirely different. Good Luck
ColC
 
Posts: 204
Joined: Mon Oct 29, 2007 9:35 am
Location: Toronto,NSW Australia


Return to SurvCE General

Who is online

Users browsing this forum: No registered users

cron