Tools - Symbol Library

Moderator: Carlson Support

Tools - Symbol Library

Postby Geoffrey Leiter, P.E. » Fri Jul 27, 2001 10:53 pm

AutoCAD 14
SC2000 CES

Any symbol created with SurvCAD in paper space will not insert.

Geoff
Geoffrey Leiter, P.E.
 

Re: Tools - Symbol Library

Postby Jason » Fri Jul 27, 2001 11:54 pm

You must be talking about Tools>Insert Symbols command
Are you sure it's not being inserted at a bigger scale factor? Zoom
extents
to make sure.

If you are inserting into PS, then the horizontal scale should be set to
1
or you could adjust the symbol size.

Jason

"Geoffrey Leiter, P.E." <darc87@hotmail.com> wrote in message
news:B4A0F73FCE8FD411AF8B00207811DE59010EA1@WEBSERVER...
AutoCAD 14
SC2000 CES

Any symbol created with SurvCAD in paper space will not insert.

Geoff
Jason
 

Re: Tools - Symbol Library

Postby Geoffrey Leiter, P.E. » Mon Jul 30, 2001 5:37 pm

Nope. I am referring to "tools>Edit Symbol Library". I create a
block from something located in paper space and store it in the symbol
library. Then I use "Tools>Insert Symbols" to insert it into paper
space and the object does not get inserted. However if I create the
same symbol in model space and then insert it in paper space, it
works. Basically what I am saying is that any symbol created in paper
space will not insert in either model nor paper space.

Geoff

"Jason" <jbly@marshandlegge.com> wrote in message
news:B4A0F73FCE8FD411AF8B00207811DE59010EA5@WEBSERVER...
| You must be talking about Tools>Insert Symbols command
| Are you sure it's not being inserted at a bigger scale factor? Zoom
extents
| to make sure.
|
| If you are inserting into PS, then the horizontal scale should be
set to 1
| or you could adjust the symbol size.
|
| Jason
|
| "Geoffrey Leiter, P.E." <darc87@hotmail.com> wrote in message
| news:B4A0F73FCE8FD411AF8B00207811DE59010EA1@WEBSERVER...
| > AutoCAD 14
| > SC2000 CES
| >
| > Any symbol created with SurvCAD in paper space will not insert.
| >
| > Geoff
| >
|
Geoffrey Leiter, P.E.
 

Re: Tools - Symbol Library

Postby Randall McSwain » Mon Jul 30, 2001 6:57 pm

Geoffrey,
I cannot duplicate this problem. [See the movie over in
customer-files].
Did you try it in a new drawing? To the best of my knowledge, Insert
Symbols uses the standard AutoCAD Insert command, so this shouldn't be a
problem. Let me know.

--
Randall McSwain
Carlson Software
http://www.carlsonsw.com




"Geoffrey Leiter, P.E." <darc87@hotmail.com> wrote in message
news:B4A0F73FCE8FD411AF8B00207811DE59010ED2@WEBSERVER...
Nope. I am referring to "tools>Edit Symbol Library". I create a
block from something located in paper space and store it in the symbol
library. Then I use "Tools>Insert Symbols" to insert it into paper
space and the object does not get inserted. However if I create the
same symbol in model space and then insert it in paper space, it
works. Basically what I am saying is that any symbol created in paper
space will not insert in either model nor paper space.

Geoff

"Jason" <jbly@marshandlegge.com> wrote in message
news:B4A0F73FCE8FD411AF8B00207811DE59010EA5@WEBSERVER...
| You must be talking about Tools>Insert Symbols command
| Are you sure it's not being inserted at a bigger scale factor? Zoom
extents
| to make sure.
|
| If you are inserting into PS, then the horizontal scale should be
set to 1
| or you could adjust the symbol size.
|
| Jason
|
| "Geoffrey Leiter, P.E." <darc87@hotmail.com> wrote in message
| news:B4A0F73FCE8FD411AF8B00207811DE59010EA1@WEBSERVER...
| > AutoCAD 14
| > SC2000 CES
|
| > Any symbol created with SurvCAD in paper space will not insert.
|
| > Geoff
|
|
Randall McSwain
 

Re: Tools - Symbol Library

Postby Geoffrey Leiter, P.E. » Mon Jul 30, 2001 7:29 pm

Randall,

Did you create an object in paper space then use the "tools>Edit
Symbol Library" and create a symbol. Then try to reinsert it with the
menu item "Tools>Insert Symbols"?

Geoff

"Randall McSwain" <rmcswain@carlsonsw.com> wrote in message
news:B4A0F73FCE8FD411AF8B00207811DE59010EE8@WEBSERVER...
Geoffrey,
I cannot duplicate this problem. [See the movie over in
customer-files].
Did you try it in a new drawing? To the best of my knowledge, Insert
Symbols uses the standard AutoCAD Insert command, so this shouldn't be
a problem. Let me know.

--
Randall McSwain
Carlson Software
http://www.carlsonsw.com




"Geoffrey Leiter, P.E." <darc87@hotmail.com> wrote in message
news:B4A0F73FCE8FD411AF8B00207811DE59010ED2@WEBSERVER...
Nope. I am referring to "tools>Edit Symbol Library". I create a
block from something located in paper space and store it in the
symbol
library. Then I use "Tools>Insert Symbols" to insert it into paper
space and the object does not get inserted. However if I create the
same symbol in model space and then insert it in paper space, it
works. Basically what I am saying is that any symbol created in
paper
space will not insert in either model nor paper space.

Geoff

"Jason" <jbly@marshandlegge.com> wrote in message
news:B4A0F73FCE8FD411AF8B00207811DE59010EA5@WEBSERVER...
| You must be talking about Tools>Insert Symbols command
| Are you sure it's not being inserted at a bigger scale factor?
Zoom
extents
| to make sure.
|
| If you are inserting into PS, then the horizontal scale should be
set to 1
| or you could adjust the symbol size.
|
| Jason
|
| "Geoffrey Leiter, P.E." <darc87@hotmail.com> wrote in message
| news:B4A0F73FCE8FD411AF8B00207811DE59010EA1@WEBSERVER...
| > AutoCAD 14
| > SC2000 CES
|
| > Any symbol created with SurvCAD in paper space will not insert.
|
| > Geoff
|
|
Geoffrey Leiter, P.E.
 

Re: Tools - Symbol Library

Postby Geoffrey Leiter, P.E. » Mon Jul 30, 2001 7:31 pm

Ok just watched your movie..very cool. I am using AutoCAD r14 with
SCAD CES. You are doing exactly what I mentioned, however it doesn't
work in R14.

Thanks,
Geoff


"Randall McSwain" <rmcswain@carlsonsw.com> wrote in message
news:B4A0F73FCE8FD411AF8B00207811DE59010EE8@WEBSERVER...
Geoffrey,
I cannot duplicate this problem. [See the movie over in
customer-files].
Did you try it in a new drawing? To the best of my knowledge, Insert
Symbols uses the standard AutoCAD Insert command, so this shouldn't be
a problem. Let me know.

--
Randall McSwain
Carlson Software
http://www.carlsonsw.com




"Geoffrey Leiter, P.E." <darc87@hotmail.com> wrote in message
news:B4A0F73FCE8FD411AF8B00207811DE59010ED2@WEBSERVER...
Nope. I am referring to "tools>Edit Symbol Library". I create a
block from something located in paper space and store it in the
symbol
library. Then I use "Tools>Insert Symbols" to insert it into paper
space and the object does not get inserted. However if I create the
same symbol in model space and then insert it in paper space, it
works. Basically what I am saying is that any symbol created in
paper
space will not insert in either model nor paper space.

Geoff

"Jason" <jbly@marshandlegge.com> wrote in message
news:B4A0F73FCE8FD411AF8B00207811DE59010EA5@WEBSERVER...
| You must be talking about Tools>Insert Symbols command
| Are you sure it's not being inserted at a bigger scale factor?
Zoom
extents
| to make sure.
|
| If you are inserting into PS, then the horizontal scale should be
set to 1
| or you could adjust the symbol size.
|
| Jason
|
| "Geoffrey Leiter, P.E." <darc87@hotmail.com> wrote in message
| news:B4A0F73FCE8FD411AF8B00207811DE59010EA1@WEBSERVER...
| > AutoCAD 14
| > SC2000 CES
|
| > Any symbol created with SurvCAD in paper space will not insert.
|
| > Geoff
|
|
Geoffrey Leiter, P.E.
 

Re: Tools - Symbol Library

Postby Randall McSwain » Tue Jul 31, 2001 6:06 am

I forget that you run R14. I will try it using R14 tomorrow and let you
know.


Ok just watched your movie..very cool. I am using AutoCAD r14 with
SCAD CES. You are doing exactly what I mentioned, however it doesn't
work in R14.
Randall McSwain
 

Re: Tools - Symbol Library

Postby Randall McSwain » Tue Jul 31, 2001 5:41 pm

Geoff,
R14 does seem to have this problem. Since the SurvCADD code is the
same for R14 and R2000+, whatever is causing this problem is most likely
the function we are using to create the block. As soon as I know some
more info, I will get back with you.


--
Randall McSwain
Carlson Software
http://www.carlsonsw.com




"Randall McSwain" <mcswain@maysvilleky.net> wrote in message
news:B4A0F73FCE8FD411AF8B00207811DE59010EFF@WEBSERVER...
I forget that you run R14. I will try it using R14 tomorrow and let
you know.


Ok just watched your movie..very cool. I am using AutoCAD r14 with
SCAD CES. You are doing exactly what I mentioned, however it
doesn't
work in R14.
Randall McSwain
 


Return to Survey

Who is online

Users browsing this forum: No registered users