Need road template to tie to existing lip of gutter

Moderator: Carlson Support

Need road template to tie to existing lip of gutter

Postby nlund1972 » Mon Feb 14, 2011 9:00 pm

I am working on a street improvement project, where the curb & gutter is being left in place. The C&G has some issues and does not have good horizaontal or vertical alignment. I want to establish my template at the centerline and tie the Edge of Pavement to either an alignment or a 3D polyline at the Lip of Gutter. The short and long: the outside edge of pavement is not a consistent grade above/below the centerline, nor is it a consistent distance from the centerline. I want the program to tell me what my cross-slope is at any given station. What is the best way to accomplish this?

Thank you.
Nate
nlund1972
 
Posts: 2
Joined: Mon Feb 14, 2011 7:48 pm
Location: South Dakota

Postby site admin » Mon Feb 14, 2011 9:10 pm

Nate,

We will handle this via the Case 53367 that you emailed to us.

Bharris
site admin
Site Admin
 
Posts: 332
Joined: Wed Nov 21, 2007 4:40 pm
Location: Maysville KY

Postby nlund1972 » Mon Feb 14, 2011 9:15 pm

Ok, thanks.
Nate
nlund1972
 
Posts: 2
Joined: Mon Feb 14, 2011 7:48 pm
Location: South Dakota


Return to Survey

Who is online

Users browsing this forum: Google [Bot]

cron