Locating points

Moderator: Carlson Support

Locating points

Postby Z » Thu Mar 29, 2012 2:55 pm

Is there a command similar to Civil 3D "Zoom to point"
Zeljko (Jack) Sumera - LSIT
Carlson 2010 with AutoCAD
Z
 
Posts: 2
Joined: Thu Mar 29, 2012 2:45 pm
Location: Los Angeles

Postby tstrickland » Thu Mar 29, 2012 3:18 pm

Yep, under the View menu, Zoom Point
or type in zoompnt at the command line & follow the prompts.
You have to play with the magnification scale for a little to get a feel for it.
Terry Strickland
tstrickland
 
Posts: 243
Joined: Thu Oct 25, 2007 6:39 pm

Or

Postby Ludeman » Tue Apr 10, 2012 2:57 pm

Or type "I" for inverse, enter the point number, and watch where the cursor drags from... :)
Ludeman
 
Posts: 39
Joined: Tue Apr 29, 2008 7:56 pm
Location: CO

Postby Z » Wed May 23, 2012 4:53 pm

tstrickland wrote:Yep, under the View menu, Zoom Point
or type in zoompnt at the command line & follow the prompts.
You have to play with the magnification scale for a little to get a feel for it.


thx Terry :D
Zeljko (Jack) Sumera - LSIT
Carlson 2010 with AutoCAD
Z
 
Posts: 2
Joined: Thu Mar 29, 2012 2:45 pm
Location: Los Angeles


Return to Survey

Who is online

Users browsing this forum: No registered users