Carlson Survey 2014/2015 - TDS/Spectra Precisions Attributes

Moderator: Carlson Support

Carlson Survey 2014/2015 - TDS/Spectra Precisions Attributes

Postby xander769 » Tue Dec 23, 2014 2:45 pm

Hello,

New use to Carlson Survey here, and had a question about Raw/RW5 data processing from TDS/Spectra Precision data collector files. We originally processed data through Bentley Inroads and had a pretty good flow, however i am curious if anyone has a way to process attributes as formatted from the above data collectors. The raw data looks like this for reference:

SS,OP30,FP2202,AR206.421216,ZE90.274037,SD344.099049,--DD2
SS,OP30,FP2203,AR205.591591,ZE90.272609,SD343.090554,--DD3
SS,OP30,FP2204,AR204.093245,ZE90.082713,SD342.183535,--GB3
SS,OP30,FP2205,AR202.102939,ZE90.004931,SD341.861390,--G
--Target Generic Prism: "My Prism", HR:5.100 (5.100 + 0.000 Offset), Prism Const.:0.0mm
LS,HI5.320,HR5.100
SS,OP30,FP2206,AR247.480942,ZE90.040125,SD386.019864,--CPBM
FC,PN2206,FNBENCHMARK
AT,TNTYPE,TVSQUARE CUT
AT,TNDESC,TVON NORTHERLY EDGE CNC BASE FOR WIND SOCK
AT,TNC,TV
SS,OP30,FP2207,AR254.295981,ZE90.451991,SD125.580457,--GDH
SS,OP30,FP2208,AR269.140694,ZE90.591031,SD125.592072,--CBT
FC,PN2208,FNCBT BASELINE TIE
AT,TNTYPE,TVCORNER
AT,TNLOCATION,TVSIGN
AT,TNABOVE GRADE,TV
AT,TNC,TVNE COR CONC SIGN BASE
SS,OP30,FP2209,AR199.114444,ZE91.452622,SD75.540302,--CBT
FC,PN2209,FNCOMMENT
AT,TNC,TVAPPROX CL

the attributes are broken out from the descriptor line and put in separate lines below the shot data. The "SS" lines are the angle rights, distances etc, with the code at the end. Followed by the feature code type and name (FC,FN), and then finally the Attribute type (AT,TN) and values below that. I have seen a few topics devoted to this question however, never saw any resolution and was curious if this was ever brought into the software or any workarounds have been found? Thanks very much in advance!


Jonathan
xander769
 
Posts: 2
Joined: Mon Dec 22, 2014 9:43 pm
Location: Rochester NY

Return to Survey

Who is online

Users browsing this forum: No registered users