Selection Cycling in Carlson Survey OEM 2015

Moderator: Carlson Support

Selection Cycling in Carlson Survey OEM 2015

Postby donna_jwsc » Tue Aug 25, 2015 9:32 pm

I cannot find the command to cycle through linework, text, etc. in 2015. Does anyone know where I can find/change this? I do a lot of work that ends up having multiple lines on top of each other and sometimes need to erase a line that is underneath another.
donna_jwsc
 
Posts: 30
Joined: Tue Jul 07, 2009 8:18 pm
Location: Hobbs, New Mexico

Re: Selection Cycling in Carlson Survey OEM 2015

Postby tstrickland » Tue Sep 01, 2015 9:20 pm

Try holding the <Ctrl> key down while you pick.
Terry Strickland
tstrickland
 
Posts: 243
Joined: Thu Oct 25, 2007 6:39 pm

Re: Selection Cycling in Carlson Survey OEM 2015

Postby Streek » Wed Sep 02, 2015 3:56 pm

Try holding the <Ctrl> key down while you pick.


That doesn't work.
I believe that's why the question was asked.
Streek
 
Posts: 87
Joined: Mon Nov 05, 2012 7:28 pm

Re: Selection Cycling in Carlson Survey OEM 2015

Postby tstrickland » Wed Sep 02, 2015 8:03 pm

It's the shift instead of control, command is SELECTIONCYCLING (system variable)
From Autocad help:
To Select Overlapping or Close Objects
1. Make sure that Selection Cycling is turned on.
2. As you roll your cursor over objects, you will see an icon indicating that multiple objects are available for selection.
3. Click to see a list of available objects, and then click in the list to select the object you want.
Tip: You can also cycle through objects by holding Shift down when you see the double-rectangle icon, and pressing the Spacebar to cycle through the objects available for selection. When the required object is highlighted, click to select it
Terry Strickland
tstrickland
 
Posts: 243
Joined: Thu Oct 25, 2007 6:39 pm

Re: Selection Cycling in Carlson Survey OEM 2015

Postby donna_jwsc » Tue Sep 29, 2015 3:09 pm

Thank you!
donna_jwsc
 
Posts: 30
Joined: Tue Jul 07, 2009 8:18 pm
Location: Hobbs, New Mexico

Re: Selection Cycling in Carlson Survey OEM 2015

Postby donna_jwsc » Fri May 13, 2016 9:52 pm

It has been a long time, but I finally found the location for the Selection Cycling. My Drafting Settings dialogue window was hiding the tab.
I am posting this so the next installation of Carlson Survey goes a lot more smoothly. Amazing how something so small can cause such anxiety!
donna_jwsc
 
Posts: 30
Joined: Tue Jul 07, 2009 8:18 pm
Location: Hobbs, New Mexico

Re: Selection Cycling in Carlson Survey OEM 2015

Postby donna_jwsc » Thu Dec 28, 2017 10:11 pm

Reminder that under the AutoCAD options, go to "selection" tab. Go to "grips", then uncheck the "allow ctrl+cycling behavior". then the selection cycling will return.
donna_jwsc
 
Posts: 30
Joined: Tue Jul 07, 2009 8:18 pm
Location: Hobbs, New Mexico

Re: Selection Cycling in Carlson Survey OEM 2015

Postby MarineSurvey » Fri Jul 22, 2022 5:13 pm

Just switched over to 22, and have lost the ability to stretch object by pulling on the grip or insert, the entire entity moves, any help would be appreciated. I have closed and rebooted the entire system and that didnt help
MarineSurvey
 
Posts: 1
Joined: Tue Nov 19, 2019 2:11 pm
Location: Alamogordo NM


Return to Survey

Who is online

Users browsing this forum: Google [Bot]