SurvCE problems on Allegro CE

Moderator: Carlson Support

SurvCE problems on Allegro CE

Postby jbrock » Thu Jul 31, 2008 2:12 pm

I'm running SurvCE 2.04 on my Allegro CE. Sometimes the program will randomly jump around to different menus without being touched. For instance, I just turned the unit on and it was on the "Survey" tab. Without being prompted, the unit switched to the "File" tab and then to the "data transfer" button. After a warm boot, I turned the unit on and it immediately jumped to the "raw data button". Even when I try to press escape, it will immediately jump to a different menu.

Anyone else having a similar problem?
jbrock
 
Posts: 3
Joined: Thu Jul 31, 2008 1:48 pm
Location: Arlington, Virginia

Postby tstrickland » Thu Jul 31, 2008 2:47 pm

Sounds like there may be some trash under the edge of the touch screen. Try cleaning with a toothbrush. Otherwise, may be a bad screen? Certainly not normal.
Terry Strickland
tstrickland
 
Posts: 243
Joined: Thu Oct 25, 2007 6:39 pm

Screen

Postby jbrock » Thu Jul 31, 2008 2:50 pm

Screen has been replaced in the last 6 months and is very clean. That was my initial thought as well.
jbrock
 
Posts: 3
Joined: Thu Jul 31, 2008 1:48 pm
Location: Arlington, Virginia

Screen

Postby Beasler » Fri Aug 01, 2008 2:06 pm

We had a similar issue with one of our Allegros. If you touched the collector near the F1 button, the collector would scroll thru all the points in the list file very fast. We had to send the collector back to Juniper for a new screen.
Beasler
 
Posts: 1
Joined: Tue Nov 20, 2007 2:51 pm


Return to SurvCE General

Who is online

Users browsing this forum: No registered users