Antenna/Reflector Height Offset

Moderator: Carlson Support

Antenna/Reflector Height Offset

Postby Marc Terry » Sat Jul 02, 2011 5:02 am

Hi All,

I'm sure there must be a way to change this in SurvCE but I can't find it anywhere.

I'm using SurvCE v2.54 and have a telescopic ranging pole with a 5/8in screw mount on top. I use the pole with a Sokkia GPS Reciever, Sokkia Total Station and Leica Total Station.

The problem is that the measurements marked on the pole give the distance from the tip of the pole to the base of the 5/8in screw meaning that I have to add an additional offset to what is reported on the pole to get the true reflector/phase centre height.

Is there anyway to automate this process? For example when using GPS can SurvCE automatically add 96mm to the height of pole?

Thanks in advance!
Marc Terry
 
Posts: 1
Joined: Sat Jul 02, 2011 3:18 am

Return to SurvCE General

Who is online

Users browsing this forum: No registered users