COnnected to base station- not recieving base corrections

Moderator: Carlson Support

COnnected to base station- not recieving base corrections

Postby survtech » Mon Mar 10, 2014 3:52 pm

I am running the Turnkey Survyor + GPS (surveyor+ survce+ novatel ant) and have been for several months and it works fantastic.
To recieve RTK base correction I use a Verizon MIFI device.
Until recently my procedure is as follows: I dial in, wait to connect to the base, recieve base corrections, wait for the FIX, then off I go.

Now
I am connected to the base station, (connected to base station waiting for reading)
but get the code "not recieveing base corrections"
I have verified my subscription, verified that the base station is opererating correctly, verified the surveyor+ is on the internet (I can google stuff)

I have check the reference station info under : moitor\skyplot> ref tab> the REf sations coords reads "waiting for base position" LAt & Long are 0

Any help would be appreciated
survtech
 
Posts: 8
Joined: Wed Jan 16, 2008 4:28 pm

Re: COnnected to base station- not recieving base correction

Postby survtech » Tue Mar 11, 2014 1:53 pm

In another forum, (SurvCE general) the MOD recommended a firmware update,
Anyone know how?
survtech
 
Posts: 8
Joined: Wed Jan 16, 2008 4:28 pm


Return to GPS

Who is online

Users browsing this forum: No registered users

cron