I am having difficulty plotting from Carlson. I don't know if I can explain properly. In ACAD, at the plot dialog box, I could rotate the plot 90 deg. In Carslon, I have to go to properties, and manually change the layout from portrait to landscape. And this doesn't solve my problem. It just rotates the page, not what I picked to plot. Does anyone understand my problem? Please help if you do.
Thanks.
Printing Problems
Moderator: Carlson Support
5 posts
• Page 1 of 1
Printing Problems
by Guy Rand » Tue Apr 21, 2009 7:59 pm
- Guy Rand
- Posts: 4
- Joined: Tue Mar 24, 2009 5:07 pm
by Ironwood » Fri Apr 24, 2009 12:26 am
Are you using Carlson on top of AutoCAD or IntelliCAD?
If you are on top of AutoCAD, all plotting functions are the same as just plain AutoCAD.
If you are on top of Intellicad, you need to go to your printer properties and select portrait or landscape there.
If you are on top of AutoCAD, all plotting functions are the same as just plain AutoCAD.
If you are on top of Intellicad, you need to go to your printer properties and select portrait or landscape there.
George M. Graham, P.E.
Owner, Chief Engineering and Administrative Officer
Ironwood Construction & Engineering LLC
PO Box 3199
Crossville, TN 38557
Owner, Chief Engineering and Administrative Officer
Ironwood Construction & Engineering LLC
PO Box 3199
Crossville, TN 38557
- Ironwood
- Posts: 7
- Joined: Thu Jun 26, 2008 8:29 pm
by Ironwood » Sat Apr 25, 2009 2:20 pm
Sorry, I run on top of AutoCAD and Intellicad.
There is a separate discussion group, below, for Survey Stand Alone.
There is a separate discussion group, below, for Survey Stand Alone.
George M. Graham, P.E.
Owner, Chief Engineering and Administrative Officer
Ironwood Construction & Engineering LLC
PO Box 3199
Crossville, TN 38557
Owner, Chief Engineering and Administrative Officer
Ironwood Construction & Engineering LLC
PO Box 3199
Crossville, TN 38557
- Ironwood
- Posts: 7
- Joined: Thu Jun 26, 2008 8:29 pm
by dr » Mon Apr 27, 2009 8:59 pm
Guy Rand,
What version of Carlson Survey are you running? Is this 2008 Standalone or 2009 Embedded AutoCAD? While in the Plot dialog box hit the arrow in the lower right hand corner - this will show additional options for the plot configuration.
Dr
What version of Carlson Survey are you running? Is this 2008 Standalone or 2009 Embedded AutoCAD? While in the Plot dialog box hit the arrow in the lower right hand corner - this will show additional options for the plot configuration.
Dr
- dr
- Site Admin
- Posts: 57
- Joined: Mon Nov 19, 2007 2:21 pm
5 posts
• Page 1 of 1
Return to General Carlson Discussion
Who is online
Users browsing this forum: No registered users