coordinate problem

[PETER LAMB]

PROBLEM: Transfering crds to data collector Crds values got flip
floped arounf(north was east, east was north). All settings are set for
northing first then easting. program=cg windows 5.60 intellicad 2001
data collector= hp48 tds
WHEN I USE CG 5.50 ALL IS WELL!!
HELP!

[Barkley Hensley, P.L.S.]

Peter,

You have probably already checked this, but humor me and take a look at the
Data Collector setting and make sure that you have TDS 48, 95, FS/2 selected
and not the TDS 48, 95, FS/2 AUS option. The AUS options will reverse the
coordinate order.



"PETER LAMB" <lamb.kiefer@snet.net> wrote in message
news:3DDEA16C.AC2E90AD@snet.net...

PROBLEM: Transfering crds to data collector Crds values got flip
floped arounf(north was east, east was north). All settings are set for
northing first then easting. program=cg windows 5.60 intellicad 2001
data collector= hp48 tds
WHEN I USE CG 5.50 ALL IS WELL!!
HELP!

[G Pottier]

In C&G under "Options" There is a toggle called "Coordinate Position" Choose
"North-East" or "East-North" accordingly.

Any new install always reverts back to default setting, i.e., north-east.

"PETER LAMB" <lamb.kiefer@snet.net> wrote in message
news:3DDEA16C.AC2E90AD@snet.net...

PROBLEM: Transfering crds to data collector Crds values got flip
floped arounf(north was east, east was north). All settings are set for
northing first then easting. program=cg windows 5.60 intellicad 2001
data collector= hp48 tds
WHEN I USE CG 5.50 ALL IS WELL!!
HELP!

[PETER LAMB]

SETTING IS SET FOR NORTH FIRST THEN EAST
STIIL HAVE PROBLEM

G Pottier wrote:

In C&G under "Options" There is a toggle called "Coordinate Position" Choose
"North-East" or "East-North" accordingly.

Any new install always reverts back to default setting, i.e., north-east.

"PETER LAMB" <lamb.kiefer@snet.net> wrote in message
news:3DDEA16C.AC2E90AD@snet.net...
PROBLEM: Transfering crds to data collector Crds values got flip
floped arounf(north was east, east was north). All settings are set for
northing first then easting. program=cg windows 5.60 intellicad 2001
data collector= hp48 tds
WHEN I USE CG 5.50 ALL IS WELL!!
HELP!