LTSCALE going to 7, 400000, etc

Moderator: Carlson Support

LTSCALE going to 7, 400000, etc

Postby calpoly93 » Thu Feb 01, 2007 3:42 am

How do you keep yout ltscale at 20 (or whatever)?? It seems to change
whenever a drawing is opened, commonly to 1, 7, or 400000.??


##-----------------------------------------------##
Article posted with CarlsonSWNewGroups
http://CarlsonSWNewGroups.sourceforge.net
Share your knowledge in... carlson.carlson-survey
##-----------------------------------------------##
calpoly93
 

Re: LTSCALE going to 7, 400000, etc

Postby Dr » Tue Feb 27, 2007 8:00 pm

This situation sounds really strange. Is there some routine you are
running before this happens? You may need to uninstall/reinstall the
software.

Dr

calpoly93 wrote:



How do you keep yout ltscale at 20 (or whatever)?? It seems to change
whenever a drawing is opened, commonly to 1, 7, or 400000.??


##-----------------------------------------------##
Article posted with CarlsonSWNewGroups
http://CarlsonSWNewGroups.sourceforge.net
Share your knowledge in... carlson.carlson-survey
##-----------------------------------------------##






##-----------------------------------------------##
Article posted with CarlsonSWNewGroups
http://CarlsonSWNewGroups.sourceforge.net
Share your knowledge in... carlson.carlson-survey
##-----------------------------------------------##
Dr
 

Re: LTSCALE going to 7, 400000, etc

Postby cook6075 » Wed Feb 28, 2007 8:44 pm

calpoly93 wrote:



How do you keep yout ltscale at 20 (or whatever)?? It seems to change
whenever a drawing is opened, commonly to 1, 7, or 400000.??


##-----------------------------------------------##
Article posted with CarlsonSWNewGroups
http://CarlsonSWNewGroups.sourceforge.net
Share your knowledge in... carlson.carlson-survey
##-----------------------------------------------##



funny I have the same problem, but also changes occassionally during a
drawing session. right now I correct the problen by typing LINETYPE at
command prompt, and set ltscale back to what I want (what a pain).

I use SURVEY 2007 on XP machine



##-----------------------------------------------##
Article posted with CarlsonSWNewGroups
http://CarlsonSWNewGroups.sourceforge.net
Share your knowledge in... carlson.carlson-survey
##-----------------------------------------------##
cook6075
 

Re: LTSCALE going to 7, 400000, etc

Postby calpoly93 » Thu Apr 12, 2007 1:34 am

Cook6075,
I am running the same, XP Survey2007...It happens at regens, switching out
of a viewport... sometimes I don't notice when it happens... VERY
annoying..!! The more viewports, the more frequent it seems to be.

cook6075 wrote:

calpoly93 wrote:



How do you keep yout ltscale at 20 (or whatever)?? It seems to
change
whenever a drawing is opened, commonly to 1, 7, or 400000.??


##-----------------------------------------------##
Article posted with CarlsonSWNewGroups
http://CarlsonSWNewGroups.sourceforge.net
Share your knowledge in... carlson.carlson-survey
##-----------------------------------------------##



funny I have the same problem, but also changes occassionally during a
drawing session. right now I correct the problen by typing LINETYPE at
command prompt, and set ltscale back to what I want (what a pain).

I use SURVEY 2007 on XP machine



##-----------------------------------------------##
Article posted with CarlsonSWNewGroups
http://CarlsonSWNewGroups.sourceforge.net
Share your knowledge in... carlson.carlson-survey
##-----------------------------------------------##






##-----------------------------------------------##
Article posted with CarlsonSWNewGroups
http://CarlsonSWNewGroups.sourceforge.net
Share your knowledge in... carlson.carlson-survey
##-----------------------------------------------##
calpoly93
 

Postby bmapper » Wed May 05, 2010 4:38 pm

I know this is an old thread, but I was having the same issue, and I believe I have found the solution.

In Drawing Setup, change Horizontal scale to 1, and set Line Type Scaler to 0.

This seemed to solve my problem. I tested with a few save, close, and reopens.

HTH

Thanks
bmapper
 
Posts: 1
Joined: Wed May 05, 2010 4:35 pm

Lt scale

Postby cfm » Wed May 05, 2010 9:48 pm

In Settings/ Carlson Config/Drawing setup/set line type scale to .1
it only took us a week to work it out
cfm
 
Posts: 22
Joined: Wed Mar 11, 2009 10:06 pm
Location: Townsville, Queensland, Australia

LTSCALE

Postby GPSMAN » Mon May 10, 2010 6:09 pm

i have the same problem.
the LTSCALE keeps going back to 25 even in different dwgs.
Jerry "Starman" Feldman
CADD/GIS/GPS/SURVEY TECH
GPSMAN
 
Posts: 78
Joined: Wed Jun 25, 2008 5:04 pm
Location: SPARKS, Maryland

LTSCALE

Postby GPSMAN » Fri Jul 23, 2010 5:45 pm

the LTSCALE goes to whatever
the dwg settings is SCALE + LTSCALE settings.

Why isn't the dwg holding the last LTSCALE used???

I have to remember to check the scale of the dwg im in
& reset LTSCALE every time before plotting :-(
Jerry "Starman" Feldman
CADD/GIS/GPS/SURVEY TECH
GPSMAN
 
Posts: 78
Joined: Wed Jun 25, 2008 5:04 pm
Location: SPARKS, Maryland


Return to Survey

Who is online

Users browsing this forum: Google [Bot]